Our Coloured Render Sample Pots are available purely as a means of testing the colours of our renders before purchase. They are available in 250 ml pots and in a default grain size of 1.5mm.
This Coloured Render Sample pot contains 250ml worth of the 1.5mm thin coat render residue pre-mixed in the colour selected. Please note: this is a sample pot and should be used only to test the actual render colour on a small area of the property. The render needs to dry and set (48-72hours at least) to represent the actual colour. Do not form a judgement of the colour when the product has just been applied.
Coloured Render Sample Pot – Technical Details
Sample pot contains a sample of the Silicone Silicate Coloured Render, approx 250ml worth. Does not contain ammonia or organic solvents.
This Coloured Render Sample Pot is available for your use as a colour tester.
It is suitable for interior and exterior surfaces.
Coloured Render Sample Pot – Technical Specifications
Composition: based on water dispersion of silicone resins with mineral fillers and pigments.
Bulk density: approx. 1.84 g/cm3
Relative diffusion resistance (non-trowelled 3 mm thick layer): ≤ 0.13 m
Water absorption after 10 hours: ≤ 360 g/m²
Coloured Render Tester Pot – Application Conditions
Application and setting temperature (air, substrate, materials): from +5°C to +25°C. Ensure the walls are clean and free from debris. Avoid applying on dusty or wet surfaces.
Grain size of sample pot: 1.5mm. Note: if you are going with 1.0mm or 2.0mm grain size, then the final colour may turn out to be lighter or darker due to the shading factors hitting the grains. The pigments within the coloured buckets will always be consistent.
Colours: selected colour range in the drop-down menu. Colour samples also available in the EWI Pro Insulation Systems colour chart.
Coloured Render Sample Pot
£7.19 – £10.19
Our Coloured Render Sample Pots are available purely as a means of testing the colours of our renders before purchase. They are available in 250 ml pots and in a default grain size of 1.5mm.
Description
Coloured Render Sample Pot
This Coloured Render Sample pot contains 250ml worth of the 1.5mm thin coat render residue pre-mixed in the colour selected. Please note: this is a sample pot and should be used only to test the actual render colour on a small area of the property. The render needs to dry and set (48-72hours at least) to represent the actual colour. Do not form a judgement of the colour when the product has just been applied.
Coloured Render Sample Pot – Technical Details
Sample pot contains a sample of the Silicone Silicate Coloured Render, approx 250ml worth. Does not contain ammonia or organic solvents.
This Coloured Render Sample Pot is available for your use as a colour tester.
It is suitable for interior and exterior surfaces.
Coloured Render Sample Pot – Technical Specifications
Composition: based on water dispersion of silicone resins with mineral fillers and pigments.
Bulk density: approx. 1.84 g/cm3
Relative diffusion resistance (non-trowelled 3 mm thick layer): ≤ 0.13 m
Water absorption after 10 hours: ≤ 360 g/m²
Coloured Render Tester Pot – Application Conditions
Application and setting temperature (air, substrate, materials): from +5°C to +25°C. Ensure the walls are clean and free from debris. Avoid applying on dusty or wet surfaces.
Grain size of sample pot: 1.5mm. Note: if you are going with 1.0mm or 2.0mm grain size, then the final colour may turn out to be lighter or darker due to the shading factors hitting the grains. The pigments within the coloured buckets will always be consistent.
Colours: selected colour range in the drop-down menu. Colour samples also available in the EWI Pro Insulation Systems colour chart.
Related Products
EWI-005 Silicone Paint – 5 litre
£29.27EWI-060 Mineral Render – 25kg
£16.19EWI-090 Monocouche Scratch Render
£13.60